Quick Contact







FIRE/SMOKE DAMPER AIRFOIL BLADE – MODEL 782 & 782-3 CLASS II *782 (1-1/2 HR.) RATED *782-3 (3 HR.) RATED


Download Product Catalogue for FIRE/SMOKE DAMPER AIRFOIL BLADE – MODEL 782 & 782-3 CLASS II *782 (1-1/2 HR.) RATED *782-3 (3 HR.) RATED

Features – U.L. rated for dynamic closure & leakage CLASS II @ 250oF (176°C) , for use in a 1-1/2 hour (782 Model) or 3 hour (782-3 Model) wall or partition. Meets NFPA 90A & UL555 & UL555S.

STANDARD CONSTRUCTION

FRAME: 4-5/16” (110) deep, 16 gauge (1.6) galvanized steel

BLADES: 6 1/2” (165) wide, double wall 20 gauge (1.0) galvanized steel in airfoil shape, equivalent to a 14-gauge (1.9) single skin blade. (Bottom blade width may vary depending on damper height)

BLADE AXLES & BEARINGS
AXLES – 7/16” (11) Plated hex mechanically fastened to blade
BEARINGS – Bronze oil impregnated

LINKAGE
Plated steel in opposed blade configuration, concealed inside the jamb.
Operator shaft is 1/2” (13) steel rod extending 4-1/2” (114) from damper side

SEALS:  Extruded Silicone blade seals and stainless steel jamb seals

MAXIMUM UL CLASSIFIED LEAKAGE CLASS II SIZES
Single section assemblies:
782, 782-32 32”W x 48”H Vertical
32”W x 36”H Horizontal

MULTIPLE SECTIONS: 

Multiple section assemblies: (made of sections no larger than above sizes)
782 (128” x96”) (3251 x 2438) vertical or horizontal mount
782-3 (128” x 48” max.) (3251 x 1219) vertical or horizontal mount

MINIMUM UL CLASSIFIED LEAKAGE CLASS II SIZE: 8”W x 8”H (305 x 203)

SLEEVE: 18 ga. x 16” (1.3 x 406) deep galvanized steel

UNDERSIZED: 1/4” under ordered size unless specified Exact or Actual

FINISH: Galvanized

HEAT SENSOR: 160o(73° C)

OPERATOR: Refer to UL approved actuator chart (Specify external or internal mounting)

Image Gallery